Icom Operation Manuals
Icom Service Manuals
Icom IC-7300 Time Adjustment Program
NOTE:
This program link above has been downloaded from Icom and it is an
alternative if you do not want to change the internal battery. This is a
windows based program, but there are scripts around for linux if you ask
google. Once installed and run it will reset and update the real time
clock. This program also does quite a few other Icom models. Read the
instructions on the below link on how to use and for other Icom radios.
IC-7300 - Time Adjustment ST4003w Instructions
Icom USB Driver
This link takes you directly to Icom Japan where you can download the
latest USB driver to interface your Icom radio to PC.
-
IC-7300 - USB Driver Ver1.3 (Direct download from Icom Japan's Website)
NOTE:
Install the driver first BEFORE you connect the radio's
USB lead.
This driver also supports all the following transceivers and
receivers. Version 1.3
・IC-7100 ・IC-7200 ・IC-7300 Mk1 ・IC-7300 MK2・IC-7410 ・IC-7600
・IC-7610 ・IC-7850 ・IC-7851 ・IC-9100 ・IC-9700 ・IC-R8600
-
IC-7300Mk2 - USB Driver Ver1.8 (Direct download from Icom Japan's Website)
NOTE:
Install the driver first BEFORE you connect the radio's
USB lead.
This driver also supports all the following transceivers and
receivers. Version 1.8
・IC-705 ・IC-905 ・IC-R15 ・ID-52A/ID-52E ・ID-50A/ID-50E ・IC-52A PLUS
・IC-7760 ・IC-7300MK2 ・ID-5200A/ID5200
If you radio is not listed above, click on the link and search for your
radio's driver on the Icom Japan's page.
Icom IC-7300 A-Z
This link below has 51 parts that will cover the Icom IC-7300 operation
from A - Z. These YouTube videos focuses on basic operation, to setting
bands, modes and programming, explaining each feature in detail.
- A to Z on the Icom IC-7300
Well worth the watch if you own one of these radios.
Icom IC-7300 Mods
NOTE:
Doing all or any modifications to your radio is at your own risk. As I
own a Icom IC-7300, I have found these mods online and should only be
done by a qualified person.
NOTE:
If you do this mod. Do not fit a diode if you use a ML2032 rechargeable battery.
IC-7300 - Low SSB Power Modification
This is a step by step guide to customize and program the Up & Down keys
on your microphone without any hardware change.
It is all done via the software in the menu screen. These buttons can be
either disabled or be used as a Tx memory on channels 1 & 2. or see the
list of commands that these keys can be programmed to.
NOTE: Refer to the IC-7300 manual on how to set-up the Tx memories for
this to work. This will also apply to the IC-9700.
Icom Microphone IC-219 Modification Gain Increase
Modification if you want to increase the mic gain on IC-219.
Icom IC-9700 Mods
